In stock

Cudy GS1018PS2 16-port Gigabit poe+ 2port Gigabit uplink+2port Gigabit SFP 200W Unmanaged Switch

SKU: 009077

Network switches

Features

Name Description
Number of RJ45 Ports 16
Ethernet Port Speed Gigabit Ethernet
Management Type Unmanaged
PoE Support No, IEEE 802.3af PoE+
Uplink Ports Gigabit RJ45, SFP

MAC Addresses 2048
Jumbo Frames 15 KB
Power supply (W) 200 W, Built-In, 100–240 V AC
Dimensions 440 × 180 × 44 mm
66 830 ֏

or 3 533 ֏ / month

← Back to «Network switches»

  • Cudy GS1018PS2 — 16-Port Gigabit PoE+ Switch with 2 Gigabit RJ45 Uplink and 2 Gigabit SFP
  • Device type: Gigabit PoE+ Ethernet Switch
  • Model: GS1018PS2
  • Hardware version: GS1018PS2 3.0
  • Management: Unmanaged
  • Total RJ45 ports: 18
  • SFP slots: 2
  • Total network interfaces: 20
  • Ethernet and Uplink
  • Ports 1–16: 16 × 10/100/1000 Mbps Gigabit RJ45 with PoE+
  • RJ45 Uplink: 2 × 10/100/1000 Mbps Gigabit RJ45
  • SFP Uplink: 2 × 1.25G SFP
  • All 18 RJ45 interfaces support Gigabit Ethernet. The two SFP slots are dedicated optical uplinks and their transmission distance depends on the installed SFP module.
  • PoE
  • PoE ports: 1–16
  • PoE standards: IEEE 802.3af / IEEE 802.3at
  • PoE mode: Mode A
  • Maximum power per PoE port: 30 W
  • PoE management: Intelligent Power Management
  • If the available power limit is exceeded, Intelligent Power Management can disconnect the most recently powered PoE device.
  • Operating Modes
  • Default Mode — normal Gigabit Ethernet switching.
  • VLAN Mode — isolates ports 1–16 from each other while retaining communication with the Uplink interfaces.
  • Extend Mode — applies to ports 9–16 and extends Ethernet/PoE transmission up to 250 m using Cat.5e or better cable, while limiting those ports to 10 Mbps.
  • PoE Watchdog — monitors connected PoE devices. If a client stops transmitting data for approximately five minutes, the Switch can restart the corresponding PoE port.
  • Cudy specifically warns against enabling Watchdog for devices performing an online automatic firmware upgrade.
  • Performance
  • Switching capacity: 40 Gbps
  • Packet forwarding rate: 29.76 Mpps
  • MAC address table: 2048 entries
  • Packet buffer: 3 Mbit
  • Jumbo Frame: 15 KB.
  • Network Standards
  • IEEE 802.3i — 10BASE-T
  • IEEE 802.3u — 100BASE-TX
  • IEEE 802.3ab — 1000BASE-T
  • IEEE 802.3z — 1000BASE-X
  • IEEE 802.3x — Flow Control
  • IEEE 802.3af — PoE
  • IEEE 802.3at — PoE+.
  • Power
  • Power input: 100–240 V AC, 50/60 Hz
  • Power supply: 200 W, built-in
  • Maximum switch consumption excluding PoE: 18 W
  • Power input: AC Inlet
  • Grounding: Three-Prong Plug.
  • Construction
  • Housing material: Metal
  • Installation: Desktop / 19" Rackmount
  • Height: 1U
  • Dimensions: 440 × 180 × 44 mm
  • Weight: 2257.1 g
  • Mounting brackets are included.
  • Protection
  • ESD protection:
  • Contact: 6 kV
  • Air: 8 kV
  • Surge protection:
  • Power: DM 2 kV / CM 4 kV
  • RJ45: CM 4 kV.
  • Environment
  • Operating temperature: 0 to +40 °C
  • Storage temperature: −40 to +70 °C
  • Operating humidity: 10–90%, non-condensing
  • Storage humidity: 10–95%, non-condensing
  • Package Contents
  • Cudy GS1018PS2
  • Power Cord
  • Rack Mounting Kit
  • Installation Guide

Products in «Network switches»