Cudy GS1016ES2 — 16-Port Gigabit Cloud Easy-Managed Switch with 2 SFP

Cudy GS1016ES2 — 16-Port Gigabit Cloud Easy-Managed Switch with 2 SFP

General Specifications

Device type: Managed Gigabit Ethernet Switch

Brand: Cudy

Model: GS1016ES2

Hardware version: 1.0

Management type: Cloud Easy-Managed / Light-Managed

Switching layer: Layer 2

Form factor: Desktop / Rackmount

Rack mounting: 19-inch

Installation: Desktop / Rackmount

Ethernet Connectivity

Number of RJ45 ports: 16 × Gigabit Ethernet

Number of SFP slots: 2 × 1.25G SFP

Total network ports: 18

Ethernet port speed: 10/100/1000 Mbps

Maximum RJ45 port speed: 1 Gbps

SFP interface: 1000BASE-X (1.25 Gbps signaling rate)

Auto-Negotiation: Supported

Auto-MDI/MDIX: Supported

Full Duplex: Supported

Half Duplex: Supported

PoE support: No

Dedicated uplink slots: 2 × SFP

SFP+ / 10GbE support: No

Network Performance

Switching capacity: 36 Gbps

Packet forwarding rate: 26.78 Mpps

MAC address table: 8192 entries (8K)

Maximum VLAN IDs: 4096

Packet buffer: 4 Mbit

Jumbo Frame: 15 KB

Forwarding method: Store-and-Forward

Network Standards

IEEE 802.3i — 10BASE-T

IEEE 802.3u — 100BASE-TX

IEEE 802.3ab — 1000BASE-T

IEEE 802.3z — 1000BASE-X

IEEE 802.3x — Flow Control

IEEE 802.3az — Energy-Efficient Ethernet

IEEE 802.1p — QoS / CoS

IEEE 802.1Q — VLAN Tagging

IEEE 802.1AB — LLDP / LLDP-MED

Layer 2 Features

802.1Q VLAN

Port-Based VLAN

MTU VLAN

IGMP Snooping

DHCP Snooping

Loop Detection

Loop Prevention

LLDP Configuration and Neighbor Discovery

Storm Control

Port Mirroring

Static Link Aggregation

MAC Address Management

Port Speed Configuration

Port Enable / Disable

Data Rate Limiting

Traffic Monitoring

Energy-Efficient Ethernet (EEE)

VLAN and QoS

VLAN capacity: Up to 4096 VLAN IDs

VLAN modes: 802.1Q / MTU / Port-Based

QoS modes: IEEE 802.1p / DSCP / Port-Based

QoS queues: 8

Scheduling methods: SP / WRR / WFQ

Port Management

Port Mirroring Sessions: Up to 4

Static Link Aggregation Groups: Up to 4

Maximum Ports per Aggregation Group: 8

Port-Based Traffic Control: Supported

Port Security / MAC Restriction: Supported

Management and Monitoring

Web Management Interface: Supported

SNMP: v1 / v2

Cudy App Management: Supported

Cloud Management: Supported

Configuration Backup and Restore: Supported

Local Firmware Upgrade: Supported

Cable Diagnostics: Supported

Ping Diagnostic Tool: Supported

SFP DDM Monitoring: Supported

Ethernet Transmission Distance

10 Mbps: Up to 100 m using Cat.3 or higher

100 Mbps: Up to 100 m using Cat.5 or higher

1000 Mbps: Up to 100 m using Cat.5e or higher

Extended transmission: Up to 250 m at 10 Mbps with software configuration

SFP optical transmission distance depends on the installed transceiver and fiber cable.

Power Specifications

Power supply: Internal AC Power Supply

Input voltage: 100–240V AC

Input frequency: 50/60 Hz

Maximum power consumption: 7.8 W

Idle power consumption: 4.5 W

Power-saving technology: IEEE 802.3az EEE

Protection and Reliability

ESD protection:

Contact discharge: 6 kV

Air discharge: 8 kV

Surge protection:

AC power, differential mode: 4 kV

AC power, common mode: 4 kV

RJ45 ports, common mode: 6 kV

MTBF: Over 200,000 hours

Grounding: Three-Prong Plug / Grounding Point

Indicators and Controls

Power LED: Supported

Speed / Link / Activity LEDs: Per Ethernet Port

Reset Button: Supported

Physical Specifications

Housing material: Metal

Cooling: Passive / Fanless

Installation: Desktop / 19-inch Rack

Dimensions: 440 × 180 × 44 mm

Weight: 1691.5 g

Operating Conditions

Operating temperature: 0 to +40 °C

Storage temperature: −40 to +70 °C

Operating humidity: 10–90%, non-condensing

Storage humidity: 10–95%, non-condensing

Package Contents

Cudy GS1016ES2 Gigabit Managed Switch

Power Cord

Rack Mounting Kit

Installation Guide

SFP transceivers are not listed in the standard package contents.