In stock

Cudy GS1010PS2 8-port Gigabit poe+ 2port Gigabit uplink+2port Gigabit SFP 120W Unmanaged Switch

SKU: 009076

Network switches

Features

Name Description
Number of RJ45 Ports 8
Ethernet Port Speed Gigabit Ethernet
Management Type Unmanaged
PoE Support No, IEEE 802.3af PoE+
Uplink Ports Gigabit RJ45, SFP

MAC Addresses 2048
Jumbo Frames 15 KB
Power supply (W) 120 W, Built-In, 100–240 V AC
Dimensions 256 × 170 × 44 mm
25 010 ֏

or 1 322 ֏ / month

← Back to «Network switches»

  • Cudy GS1010PS2 — 8-Port Gigabit PoE+ Switch with 2 Gigabit RJ45 Uplink and 2 Gigabit SFP
  • Device type: Gigabit PoE+ Ethernet Switch
  • Model: GS1010PS2
  • Current hardware versions: GS1010PS2 4.0 / 4.1
  • Management: Unmanaged
  • Total RJ45 ports: 10
  • SFP slots: 2
  • Total network interfaces: 12
  • Ethernet and Uplink
  • Ports 1–8: 8 × 10/100/1000 Mbps Gigabit RJ45 with PoE+
  • RJ45 Uplink: 2 × 10/100/1000 Mbps Gigabit RJ45
  • Optical Uplink: 2 × 1.25G SFP slots
  • The SFP interfaces support Gigabit fiber connections using compatible SFP modules. Optical transmission distance depends on the installed SFP module.
  • PoE
  • PoE ports: 1–8
  • PoE standards: IEEE 802.3af / IEEE 802.3at
  • PoE type: Mode A
  • Maximum power per PoE port: 30 W
  • PoE management: Intelligent Power Management
  • The switch can automatically disconnect the most recently powered PoE device if the available power limit is exceeded.
  • Operating Modes
  • Default Mode — standard Ethernet switching.
  • VLAN Mode — isolates the Downlink ports from one another. The isolated ports can communicate with the Uplink interfaces but not directly with each other.
  • Extend Mode — extends Ethernet and PoE transmission on ports 1–8 up to 250 m, with the affected ports limited to 10 Mbps.
  • PoE Watchdog — monitors connected PoE devices and automatically restarts the corresponding PoE port if a device stops transmitting data for approximately five minutes.
  • Performance
  • Switching capacity: 24 Gbps
  • Packet forwarding rate: 17.856 Mpps
  • MAC address table: 2048 entries
  • Packet buffer: 3 Mbit
  • Jumbo Frame: 15 KB.
  • Network Standards
  • IEEE 802.3i — 10BASE-T
  • IEEE 802.3u — 100BASE-TX
  • IEEE 802.3ab — 1000BASE-T
  • IEEE 802.3z — 1000BASE-X
  • IEEE 802.3x — Flow Control
  • IEEE 802.3af — PoE
  • IEEE 802.3at — PoE+.
  • Power
  • Power input: 100–240 V AC, 50/60 Hz
  • Power supply: 120 W, built-in
  • Maximum switch consumption excluding PoE: 10 W
  • Power connector: AC Inlet
  • Grounding: Three-Prong Plug.
  • Construction
  • Housing: Metal
  • Installation: Desktop / Rackmount
  • Height: 1U
  • Cooling: silent cooling system
  • Dimensions: 256 × 170 × 44 mm
  • Weight: 935.1 g.
  • Protection and Environment
  • ESD protection: Contact 6 kV / Air 8 kV
  • Power surge protection: DM 2 kV / CM 4 kV
  • RJ45 surge protection: CM 4 kV
  • Operating temperature: 0 to +40 °C
  • Storage temperature: −40 to +70 °C
  • Operating humidity: 10–90%, non-condensing
  • Storage humidity: 10–95%, non-condensing.
  • Package Contents
  • Cudy GS1010PS2
  • Power Cord
  • Mounting Kit
  • Installation Guide

Products in «Network switches»